Rules change. Confirm with the city, and with your HOA, before you build. How we check sources

City of Glendale · Maricopa County, Arizona

Do you need a permit in Glendale?

Glendale publishes a floor-area line for when a building permit is needed, a height-based setback formula for accessory structures, a fence exemption in its adopted building code, and a valuation-based building permit fee table. Planning must clear most accessory structures before Building Safety takes the plans.

Building permit above the floor-area line; Zoning Clearance first

Patio cover, pergola, and ramada

Glendale's code compliance brochure names patio covers among the structures that need a building permit above a floor-area line, and Planning wants a Zoning Clearance before the building permit. The pages we read do not name pergolas or ramadas separately.

Size or height threshold

When a patio cover needs a building permit

The city's Code Compliance brochure says no building or structure of any type with a floor area greater than 120 square feet may be constructed, altered, or repaired without first getting a building permit, and that this includes accessory buildings, awnings, patio covers, enclosures, and room additions.

Source: City of Glendale Code Compliance, Common City Codes brochure (PDF) · checked 2026-11-19

Rule

Zoning Clearance from Planning comes first

The Building Safety page says single-family residential projects for accessory structures, additions, and accessory dwelling units require Zoning Clearance Letter (ZCL) approval from the Planning Division before you submit for a building permit.

Source: City of Glendale, Building Safety, Codes & Services · checked 2026-11-19

Rule

Zoning Clearance application, fee, and timing

The residential zoning clearance packet lists 'Detached Structure (over 7 ft peak height)' as an application type, shows an application fee of $144.00, and says processing may take up to 10 business days from payment. You first submit a Planning Service Request through the Planning Portal. The packet also says a Zoning Clearance does not guarantee a building permit.

Source: City of Glendale, Zoning Clearance Application Packet for Residential Modifications (Rev. Sept. 2026, PDF) · checked 2026-11-19

Rule

Attached covers count as part of the house

The Planning FAQ says that if an accessory building is attached to the principal building by any part of a common wall or covered roof, it is deemed part of the principal building and must meet the principal building's development standards. Detached buildings and structures must be behind the nearest front plane of the house and may not be built in any right-of-way or easement.

Source: City of Glendale Planning & Zoning, FAQ (Accessory Building and Structures) · checked 2026-11-19

Setback

Setbacks for detached patio covers and ramadas

Under the Unified Development Code rules quoted in the Planning FAQ, accessory buildings and structures up to 7 feet tall must stay at least 3 feet from the side and rear property lines. For each foot over 7 feet, the side and rear setback increases by 2 feet; the city's example is a 13-foot structure needing 15 feet. Rear setbacks are zero where an alley is at the rear yard next to another residential property.

Source: City of Glendale Planning & Zoning, FAQ (Accessory Building and Structures) · checked 2026-11-19

Size or height threshold

Height and size limits

The Planning FAQ caps accessory buildings and structures at 16 feet in the R1, RR, and SR zoning districts and 20 feet in A-1; in other districts they may not exceed the height of the principal building. In the Glendale Centerline Overlay the cap is 15 feet. Gross floor area of any accessory building or structure may not exceed 50% of the principal building's footprint (with listed district exceptions), and accessory structures count toward lot coverage.

Source: City of Glendale Planning & Zoning, FAQ (Accessory Building and Structures) · checked 2026-11-19

Rule

Temporary shade structures are not allowed

The Code Compliance brochure says lightweight shade structures of canvas, plastic, or metal material, including ones some may consider 'temporary', are not eligible for a building permit, mainly because of structural stability concerns, and so are not allowed as a permanent use.

Source: City of Glendale Code Compliance, Common City Codes brochure (PDF) · checked 2026-11-19

Turnaround

Plan review target time

Glendale's building plan review targets list Room Additions & Accessory Buildings at 10 business days for the first review and 10 for second and later reviews, plus a listed 1-business-day project intake completeness review. The targets assume complete drawings. Expedited review is 50% of the listed time, needs Building Safety Official approval, and is charged at 300% of the normal plan review fee. The document is marked effective 1/29/2018.

Source: City of Glendale, Plan Review: Target Turnaround Times (PDF linked from the Building Permits page) · checked 2026-11-19

Fee

Building permit fee and plan review

Glendale's fee schedule bases residential building permit fees on project valuation using Table 3A: $29.79 for a valuation of $1.00 to $500.00, then $29.79 for the first $500.00 plus $3.85 for each additional $100.00 or fraction up to $2,000.00, then $86.64 for the first $2,000.00 plus $17.74 for each additional $1,000.00 or fraction up to $25,000.00, then $494.66 for the first $25,000.00 plus $12.78 for each additional $1,000.00 up to $50,000.00. Valuation is the estimated cost as determined by the Building Official, and Table 3B is the valuation chart. For custom home, remodel, and room addition plans, building plan review is 75% of the building permit fee (minimum $122.88). The schedule has no separate line item for patio covers or sheds. Work started before a permit is issued is charged 200% of new permit fees, and re-inspections are listed at $114.35 each (2-hour minimum). The schedule is dated effective May 10, 2019, and it is still the fee schedule the city's Fee Schedule page links to.

Source: City of Glendale Community Development Fee Schedule, effective May 10, 2019 (PDF linked from the city's Fee Schedule page) · checked 2026-11-19

Not published

Pergolas, open lattice, and typical cost

The Glendale pages we used do not say whether an open pergola without a solid roof is treated differently from a patio cover, and they do not publish a construction-cost range. YardPermits is not adding one. Ask Development Services before you build.

Source: City of Glendale, Building Safety, Codes & Services · checked 2026-11-19

Building permit above the fence height line; zoning height limits to confirm

Block wall and fence

Glendale's adopted building code exempts ordinary fences up to a set height from a building permit, but an older city brochure and the fee schedule use a lower line. We could not open the zoning code's wall and fence section, so front and side yard height limits are left unverified.

Size or height threshold

Building permit line in the adopted code

Ordinance O25-51, which adopted the 2024 codes, amends Section 105.2 (Work Exempt from Permit), item 2, to exempt fences, other than swimming pool barriers and perimeter subdivision fences, not over 7 feet high. The same ordinance deletes the residential code's own administrative sections R102 through R114 and says to see the 2024 International Building Code and its amendments for administration.

Source: City of Glendale Ordinance No. O25-51, 2024 building code adoption and amendments (PDF) · checked 2026-11-19

Rule

When the 2024 codes took effect

A Development Services memo dated December 10, 2025 says the City adopted the 2024 International Building Codes, Fire Codes, and amendments on December 9, 2025, effective January 9, 2026. Plans submitted after July 9, 2026 must comply with the 2024 codes and amendments.

Source: City of Glendale Development Services memo, 2024 City of Glendale Building Code Implementation (December 10, 2025, PDF) · checked 2026-11-19

Rule

Older city documents use a lower line

The city's Code Compliance brochure says fences or walls that exceed six feet in height require a building permit. The brochure predates the 2024 code adoption, and the 2019 fee schedule below also prices fence walls over 6 feet. Because the lines differ, confirm with Development Services at 623-930-2800 before you build a wall between those heights.

Source: City of Glendale Code Compliance, Common City Codes brochure (PDF) · checked 2026-11-19

Fee

Fence and wall permit fees

The fee schedule's Fence/Wall Permits section lists structural plan review at $122.88 ($61.44 minimum for a half hour), and building permit fees of $0.12 per square foot for perimeter residential subdivision walls, $0.12 per square foot for fence walls over 6 feet in height, and $0.19 per square foot for retaining walls of any height. The schedule is dated effective May 10, 2019.

Source: City of Glendale Community Development Fee Schedule, effective May 10, 2019 (PDF linked from the city's Fee Schedule page) · checked 2026-11-19

Turnaround

Plan review target time

The building plan review targets list Retaining Walls, Fences, Pool Engineering at 10 business days for the first review and 10 for later reviews. The document is marked effective 1/29/2018.

Source: City of Glendale, Plan Review: Target Turnaround Times (PDF linked from the Building Permits page) · checked 2026-11-19

Rule

Pool barrier

The Code Compliance brochure says any swimming pool or similar body of water with a minimum depth of eighteen inches must be enclosed by a wall or fence at least five feet high, with self-closing and self-latching gates and no fence openings larger than 4 inches. A secondary barrier, enforced by the Fire Department, is required if a child under 6 years old lives in the home.

Source: City of Glendale Code Compliance, Common City Codes brochure (PDF) · checked 2026-11-19

Rule

Fence upkeep

The Code Compliance brochure says fences must be structurally sound and maintained so they are not a hazard, in disrepair, or blighted. Leaning or damaged fences and fences with excessive missing or damaged slats or blocks are prohibited.

Source: City of Glendale Code Compliance, Common City Codes brochure (PDF) · checked 2026-11-19

Not published

Zoning height limits for front, side, and rear walls

Glendale's Zoning page says zoning standards are set by the Unified Development Code, effective January 12, 2024, and links it on the city's code host. We could not open the code's screening, walls, and fences section, so we are not stating front, side, or rear yard wall height limits. Call the Planning Division at 623-930-2800.

Source: City of Glendale, Planning & Zoning, Zoning · checked 2026-11-19

Depends on floor area and height

Storage shed and detached structure

Glendale draws a floor-area line for when a shed needs a building permit and uses a height-based setback formula for anything taller than the small-shed exception.

Size or height threshold

Code Compliance summary for sheds

The Code Compliance brochure says one-story detached accessory buildings such as tool or storage sheds and playhouses with a floor area less than 120 square feet do not require a permit, but yard setbacks may be required depending on building height. It says storage sheds are limited to one per residential property, must be in a side or rear yard, and must not be visible from public view, and that yard setbacks are waived when the shed is less than 120 square feet and six feet or less in height.

Source: City of Glendale Code Compliance, Common City Codes brochure (PDF) · checked 2026-11-19

Size or height threshold

When a shed needs a permit

The Planning FAQ says all accessory structures that exceed 120 square feet require a building permit, and that one below 120 square feet but taller than 6 feet does not need a building permit but must meet accessory structure setbacks.

Source: City of Glendale Planning & Zoning, FAQ (Accessory Building and Structures) · checked 2026-11-19

Setback

Small-shed exception

The Planning FAQ says movable or manufactured structures such as tool and storage sheds, children's play equipment, and pet shelters smaller than 120 square feet and less than six feet tall may sit within a required rear or side yard setback, but not in a required landscape setback, and must be behind a property screen wall or behind the front plane of the house. The roof may not drain onto the adjacent property.

Source: City of Glendale Planning & Zoning, FAQ (Accessory Building and Structures) · checked 2026-11-19

Setback

Setbacks for larger or taller sheds

The zoning clearance packet says accessory buildings and structures up to 7 feet tall need at least 3 feet from the side and rear property lines, and the side and rear setbacks grow by 2 feet for each foot over 7 feet, up to the principal building setback requirements. Its table runs from 3 feet at 7 feet tall to 21 feet at 16 feet tall. The setback is the more restrictive of recorded easements or the table. A structure attached to the house and accessible from it is treated as a home addition; one attached but not accessible from the house is treated as an ADU.

Source: City of Glendale, Zoning Clearance Application Packet for Residential Modifications (Rev. Sept. 2026, PDF) · checked 2026-11-19

Setback

Separation from the house

The Planning FAQ says no accessory building (for example a freestanding garage or pool house) may be within 6 feet of the principal building if fire rated, or 10 feet if not fire rated. Accessory buildings and structures may not be built in any right-of-way or easement.

Source: City of Glendale Planning & Zoning, FAQ (Accessory Building and Structures) · checked 2026-11-19

Size or height threshold

Maximum height and size

Accessory buildings and structures may not exceed 16 feet in the R1, RR, and SR districts or 20 feet in A-1, and in other districts may not exceed the principal building's height. Gross floor area may not exceed 50% of the principal building's footprint, and sheds count toward lot coverage.

Source: City of Glendale, Zoning Clearance Application Packet for Residential Modifications (Rev. Sept. 2026, PDF) · checked 2026-11-19

Rule

Zoning Clearance from Planning comes first

The Building Safety page says single-family residential projects for accessory structures, additions, and accessory dwelling units require Zoning Clearance Letter (ZCL) approval from the Planning Division before you submit for a building permit.

Source: City of Glendale, Building Safety, Codes & Services · checked 2026-11-19

Rule

Zoning Clearance application, fee, and timing

The residential zoning clearance packet lists 'Detached Structure (over 7 ft peak height)' as an application type, shows an application fee of $144.00, and says processing may take up to 10 business days from payment. You first submit a Planning Service Request through the Planning Portal. The packet also says a Zoning Clearance does not guarantee a building permit.

Source: City of Glendale, Zoning Clearance Application Packet for Residential Modifications (Rev. Sept. 2026, PDF) · checked 2026-11-19

Rule

Submittal requirements for accessory buildings

The residential submittal requirements for remodels, additions, alterations, and accessory buildings say a Zoning Clearance Letter and plan approval are required for all lots before the construction submittal is accepted. Plans must be electronic PDFs and include a site plan (with lot dimensions, easements, setback distances, and lot coverage calculations), floor plan, foundation plan, roof/floor plan, framing plan, building section, and elevations. The plan review fee is paid when the submittal is accepted and the permit fee at issuance.

Source: City of Glendale, Residential Remodels, Additions, Alterations & Accessory Buildings Submittal Requirements (updated 1/9/2026, PDF) · checked 2026-11-19

Turnaround

Plan review target time

The building plan review targets list Room Additions & Accessory Buildings at 10 business days for the first review and 10 for later reviews, plus a listed 1-business-day project intake completeness review. The document is marked effective 1/29/2018.

Source: City of Glendale, Plan Review: Target Turnaround Times (PDF linked from the Building Permits page) · checked 2026-11-19

Fee

Building permit fee and plan review

Glendale's fee schedule bases residential building permit fees on project valuation using Table 3A: $29.79 for a valuation of $1.00 to $500.00, then $29.79 for the first $500.00 plus $3.85 for each additional $100.00 or fraction up to $2,000.00, then $86.64 for the first $2,000.00 plus $17.74 for each additional $1,000.00 or fraction up to $25,000.00, then $494.66 for the first $25,000.00 plus $12.78 for each additional $1,000.00 up to $50,000.00. Valuation is the estimated cost as determined by the Building Official, and Table 3B is the valuation chart. For custom home, remodel, and room addition plans, building plan review is 75% of the building permit fee (minimum $122.88). The schedule has no separate line item for patio covers or sheds. Work started before a permit is issued is charged 200% of new permit fees, and re-inspections are listed at $114.35 each (2-hour minimum). The schedule is dated effective May 10, 2019, and it is still the fee schedule the city's Fee Schedule page links to.

Source: City of Glendale Community Development Fee Schedule, effective May 10, 2019 (PDF linked from the city's Fee Schedule page) · checked 2026-11-19

Separate from the city

HOA architectural approval

A city permit and your HOA's architectural approval are different decisions. Glendale's own permit pages tell you to check with your HOA before you apply.

Rule

Glendale says to check HOA rules first

The Building Safety page says it is highly recommended that applicants verify HOA requirements before submitting plans. The residential zoning clearance packet encourages owners to contact their Homeowner's Association or Property Owner's Association to see whether it has different standards or design criteria.

Source: City of Glendale, Building Safety, Codes & Services · checked 2026-11-19

Rule

Association approval is not a city sign-off

Arizona Revised Statutes section 33-1817, in its provisions on design review deposits for planned communities, says neither approval of the plans nor approval of the construction by the association or its design review committee is a representation or warranty that they comply with governmental requirements or engineering, design, or safety standards. Subsection B.3 says approval of a construction project's architectural designs, plans, and amendments shall not unreasonably be withheld. HOA review does not replace the city permit.

Source: A.R.S. § 33-1817 · checked 2026-11-19

Who to call

Who to call

Development Services Center and Building Safety contacts

The Building Safety contact page lists Development Services at 623-930-2800, counter assistance Monday to Friday 8 a.m. to 5 p.m., at 5850 W. Glendale Avenue, Glendale, AZ 85301. It names Brian Hickman, Building Official/Deputy Director, Development Services Department, at (623) 930-3151, and Kevin Ybarra, Building Inspection Supervisor, at (623) 930-3130.

Source: City of Glendale, Building Safety Contact Information · checked 2026-11-19

Who to call

Planning Division for zoning questions

The Planning & Zoning FAQ tells residents to call 623-930-2800 and ask for the 'Planner of the Day' to verify zoning information while the FAQ is updated for the newly adopted Unified Development Code.

Source: City of Glendale Planning & Zoning, FAQ (Accessory Building and Structures) · checked 2026-11-19

Questions homeowners ask

Does a storage shed need a Glendale permit?

Accessory structures over 120 square feet need a building permit. A shed under 120 square feet does not, but if it is taller than 6 feet it must meet the accessory structure setbacks.

Source: City of Glendale Planning & Zoning, FAQ (Accessory Building and Structures) · checked 2026-11-19

Do I need a permit for a backyard fence in Glendale?

Under Glendale's 2024 building code amendments, fences not over 7 feet high are exempt from a building permit, except swimming pool barriers and perimeter subdivision fences. Older city documents use a 6-foot line, so confirm with Development Services.

Source: City of Glendale Ordinance No. O25-51, 2024 building code adoption and amendments (PDF) · checked 2026-11-19

How is a Glendale building permit fee calculated?

By project valuation under Table 3A: $29.79 for $1.00 to $500.00, with higher steps above that. Residential building plan review for remodel and addition plans is 75% of the building permit fee, with a $122.88 minimum.

Source: City of Glendale Community Development Fee Schedule, effective May 10, 2019 (PDF linked from the city's Fee Schedule page) · checked 2026-11-19

How long does Glendale take to review plans?

The city's targets are 10 business days for the first review of room additions and accessory buildings, and 10 business days for retaining walls and fences, assuming complete drawings.

Source: City of Glendale, Plan Review: Target Turnaround Times (PDF linked from the Building Permits page) · checked 2026-11-19

Does HOA approval replace the city permit?

No. Arizona law says association or design committee approval of plans or construction is not a warranty that the work meets governmental requirements.

Source: A.R.S. § 33-1817 · checked 2026-11-19

Contractor quotes

Get quotes from local builders

Quote requests are turned off. This page does not collect your project, does not store a form submission, and does not load a scheduling or advertising script.

When lead-gen is switched on, requests will go to [email protected]. That address is a placeholder until Chris Wahl connects it.